Products Description
The Aluminium CNC Turning is a 2ml chromatography sample vial rack (24-position structure) made of AL6061 aluminum alloy. The overall structure is formed using CNC turning as the core process, combined with multi-axis precision milling. The surface is sandblasted and then subjected to black hard anodizing (50μm film thickness). This product is primarily used in chromatography analysis systems in medical and laboratory settings, where high requirements are placed on dimensional consistency, well position accuracy, structural stability, and surface corrosion resistance.
Material Properties
Mechanical Properties and Handling Applicability
AL6061 for Aluminium CNC Machining Parts is most commonly used in its T6 state (solution treatment followed by artificial aging). In this state, the material exhibits an excellent strength-to-weight ratio, with a yield strength exceeding 240 MPa and a tensile strength exceeding 290 MPa. This ensures sufficient structural integrity of the bearing housing under dynamic loads, vibration, or certain impacts, while its lightweight nature helps reduce the inertia of moving parts.
Biocompatibility and Cleanliness Basis
Although AL6061 for CNC Aluminum Machining Parts is not an implantable material, its chemical composition is stable, non-toxic, and harmless. After appropriate surface treatment (such as anodizing), the resulting alumina ceramic layer is chemically extremely stable, with no exudates, meeting the general requirements for material safety and biocompatibility in medical devices. Its dense, non-porous structure provides an ideal substrate for achieving high cleanliness standards.
Production Process and Flow
Raw Material Inspection
Strictly select AL6061 aluminum rods conforming to EN 573 standards to ensure uniform chemical composition for Machined Aluminium Parts.
01
Precision Milling
High-precision milling is performed on contact and connecting surfaces to eliminate stress concentration caused by serrated edges for Aluminium Machining Parts.
02
Surface Treatment
After sandblasting and degreasing, hard anodizing is performed with a film thickness controlled at 50μm. This is followed by sandblasting and coloring to form a uniform black surface.
03
Final Inspection
Full-dimensional inspection is performed using a coordinate measuring machine, and the oxide film thickness is measured to ensure all key parameters of Aluminium CNC Machining Parts meet standards.
04
Detailed Showcase
The CNC Aluminum Machining Parts uses a tiered protective packaging method. First, the inner layer is sealed with a thickened plastic bag for moisture protection. The outer layer is placed in a cardboard box and reinforced with strapping to improve its resistance to pressure during transport. The entire box is then wrapped with stretch film to enhance overall stability and dust and water resistance. Finally, it is placed on a pallet and secured again with strapping to ensure safe and reliable long-distance transportation.
contact us
For detailed technical specifications and drawings of Aluminium CNC Turning or to request sample testing, please contact our technical engineers for a professional response.
Hot Tags: aluminium cnc turning, China aluminium cnc turning manufacturers, suppliers, factory, CNC Aluminum Machining Parts, CNC Machined Aluminum Part, CNC Aluminum Parts for Machine Shaft, cnc part, aluminum cnc part, CNC Milling Aluminum Parts
