Solid Contact
Solid Contact Manufacturer for Relays, Contactors, and Electrical Switches
Xiamen Apollo Electric Co., Ltd. manufactures solid electrical contacts using high-purity silver and silver alloy materials, including Ag9999, AgNi10, AgSnO₂, and AgSnO₂In₂O₃. Established in 1990, Apollo supplies precision contact components for relays, contactors, circuit breakers and industrial control switches, with material selection based on electrical load, switching frequency and contact operating conditions.
Our solid contact manufacturing capabilities include:
Material options: Ag9999, AgNi10, AgSnO₂, AgSnO₂In₂O₃, and other specified silver alloys.
Component geometry: Round, flat, cylindrical, rivet-type, and drawing-based contact profiles.
Production processes: Powder metallurgy, sintering, cold heading, precision forming, and secondary machining, according to material and geometry.
Applications: Electromagnetic relays, AC contactors, circuit breakers, industrial switches, and electrical control equipment.
Request a Factory Direct Quote
Explore Our Solid Contact Product Catalog
Compare pure silver and silver alloy contact options for relay, contactor, and industrial switching applications.
-
Copper Switch ContactsXiamen Apollo Electric Co., Ltd. is a professional manufacturer of high-performance Copper Switch Contacts. Our products are made of high-purity oxygen-free copper wire, available in...read more
-
Round Head Metal Copper RivetThese Round Head Metal Copper Rivets are cold‑formed from C1100 / C10200 copper. Controlled annealing delivers 45‑55 HV hardness with ±0.01 mm shank tolerance. Optional plating for relays, MCCBs,...read more
-
Pure Silver Contact RivetIn electrical systems with extremely high requirements for conductivity stability, contact reliability, and long-term lifespan, the choice of contact material directly determines the performance...read more
-
Pure Copper Rivet-Type ContactsCore switching components in new energy storage, automotive power electronics, and industrial high/low-voltage switchgear have long faced engineering challenges such as excessive temperature rise,...read more
-
Electrical Contact Rivets For SwitchesElectrical contact rivets for switches are critical conductive components formed in a single operation via a multi-station cold-heading process, using high-purity electrolytic copper (Cu ≥ 99.99%)...read more
-
Electrical Silver Solid Contact Rivet For RelaysElectrical Silver Solid Contact Rivet for Relays are core conductive components used in relay contact systems. Made from pure silver or silver-based alloy solid material through cold forging, they...read more
-
Pure Copper Electrical Contact RivetsPure Copper Electrical Contact Rivets are standardized components formed by cold heading or stamping, used to achieve reliable electrical connections in low to medium current, normal environments....read more
-
Electrical Contact Rivets For SocketElectrical Contact Rivets for Socket is precision riveted contact elements made of high-purity silver alloy, specifically designed for use in high-end sockets, relays, and switching devices. They...read more
-
Silver Nickel Electrical Contacts For ContactorSilver Nickel Electrical Contacts for Contactors are AgNi‑series alloy contacts made by powder metallurgy, featuring stable contact resistance, good anti‑welding, and wear‑resistant performance....read more
-
Red Copper Contact Rivets For RelaysIn electrical control systems, Red Copper Contact Rivets for Relays are the core components for controlling current flow. They are monolithic copper contacts, also known as copper pins, made...read more
-
Agni Electrical Contacts For ContactorThe Agni Electrical Contacts For Contactor are high-performance electrical contact components specifically designed for industrial automation systems. They aim to optimize conductivity efficiency,...read more
-
Electrical Silver Contact PointsIn the field of modern power control and automation, every activation and deactivation of a relay challenges the limits of electrical contact materials. As the core "heart" of control circuits,...read more
Material Standards, Tooling & Forming Processes
The material composition of a solid contact directly affects electrical conductivity, contact resistance, hardness, and resistance to arc erosion. Unlike bimetal contacts, a monolithic solid contact is manufactured from one selected material throughout its cross-section. This structure avoids a separate silver-to-copper bonding interface and provides consistent material composition across the contact body.
Apollo's solid contact material range includes high-purity silver and several silver alloy systems. Material selection should consider the electrical load, AC or DC switching conditions, contact force, switching frequency, and expected operating life.
1. High-Purity Silver (Ag9999)
Pure silver provides very high electrical and thermal conductivity. It is suitable for applications where low electrical resistance and efficient current transfer are primary requirements.
However, pure silver is not automatically the best choice for every switching application. Its relatively low hardness and susceptibility to material transfer under certain arc conditions must be considered when selecting contacts for frequent or high-load switching.
2. Silver Nickel (AgNi10)
AgNi10 contains approximately 10% nickel in the silver alloy system. Nickel addition increases hardness and mechanical strength compared with pure silver.
AgNi10 is used in electrical contacts where conductivity, wear resistance, and resistance to material transfer must be balanced. It can be considered for relay and switching applications with frequent operation, subject to load and endurance validation.
3. Silver Tin Oxide (AgSnO₂)
AgSnO₂ is a silver metal-oxide contact material. Tin oxide particles distributed within the silver matrix help control arc erosion and contact welding under suitable switching conditions.
The material is commonly evaluated for AC switching applications involving relatively high electrical loads. Its performance depends on oxide distribution, material density, manufacturing quality, and the electrical characteristics of the switching circuit.
4. Silver Tin Oxide Indium Oxide (AgSnO₂In₂O₃)
This material combines a silver matrix with tin oxide and indium oxide components. Its electrical and mechanical characteristics depend on the actual composition and powder-processing conditions.
It can be evaluated for switching applications requiring a specific balance of contact resistance, arc erosion behavior, and thermal stability.
5. Silver Cadmium Oxide (AgCdO)
AgCdO has been used in traditional electrical switching contacts because of its arc resistance and resistance to contact welding in certain applications.
However, cadmium-containing materials are subject to regulatory restrictions in several markets. Buyers should confirm applicable RoHS exemptions, end-product requirements, and destination-market regulations before specifying AgCdO.
Solid Contact Material Comparison
| Material | Main composition | Main electrical or mechanical characteristics | Typical application considerations |
| Ag9999 | 99.99% pure silver | Very high conductivity, low bulk resistance | Signal and low-resistance switching contacts |
| AgNi10 | Silver with approximately 10% nickel | Higher hardness and mechanical strength than pure silver | Relays and frequent switching |
| AgSnO₂ | Silver-tin oxide composite | Arc erosion and welding resistance | AC contactors and switching devices |
| AgSnO₂In₂O₃ | Silver-tin oxide-indium oxide composite | Composition-dependent arc and thermal behavior | Specified industrial switching applications |
| AgCdO | Silver-cadmium oxide composite | Established arc-resistant contact material | Qualified legacy and permitted applications |
Material performance depends on the actual formulation, density, contact geometry, and switching conditions. The table provides material-selection guidance rather than guaranteed product ratings.
Precision Forming and Manufacturing
Solid contacts require controlled material processing to maintain dimensional consistency and internal material quality.
Apollo's manufacturing process can be evaluated according to the selected material and component geometry.
Key production considerations include:
Powder preparation: Silver and alloying powders require controlled composition and particle characteristics.
Powder compaction: Forming pressure affects green density and the geometry of the compacted component.
Sintering: Controlled thermal processing promotes particle bonding and the required material density.
Extrusion or secondary forming: Used where the component geometry and material route require additional consolidation or dimensional shaping.
Precision stamping and machining: Establish the final contact profile, diameter, thickness, and contact surface.
Annealing: Where specified, controlled heat treatment adjusts material condition and residual stress.
For projects requiring a dedicated solid silver material specification, see Solid Silver Contact.
Advanced Joining, Insulation & Surface Treatments
A solid contact differs from a plated or bimetal contact because the conductive contact body is made from one material rather than a silver coating or a silver layer bonded to a copper substrate.
This distinction affects material utilization, joining requirements, and the final electrical interface.
For applications where a solid silver contact is installed onto a copper or brass support, the connection process must be evaluated separately from the contact material itself.
Silver Contact Joining
Depending on the contact geometry and mounting structure, solid contacts may be integrated into electrical assemblies using:
Resistance welding
Silver brazing
Vacuum brazing
Mechanical riveting
In-die riveting, where the assembly design supports it
The joining method should be selected according to substrate compatibility, joint area, required mechanical retention, and thermal exposure.
For silver-to-copper or silver-to-brass assemblies, joining temperature and filler material selection must be controlled to avoid excessive thermal effects on the contact material.
Contact Surface Preparation
The contact surface directly interfaces with the mating electrical contact. Surface contamination, roughness, oxidation, and dimensional deviations can influence initial contact resistance and switching behavior.
Recommended controls include:
Removal of forming residues and loose particles.
Control of burrs and edge deformation.
Surface cleaning before assembly.
Verification of contact face flatness.
Protection against contamination during packaging.
Material Selection for Switching Conditions
| Operating condition | Material evaluation priority |
| Low-current signal switching | Electrical conductivity and stable contact resistance |
| Frequent relay operation | Wear resistance and material transfer |
| High-load AC switching | Arc erosion and contact welding behavior |
| DC switching | Arc duration, material transfer, and contact separation conditions |
| Elevated contact temperature | Thermal stability and material hardness |
| Corrosive operating environment | Contact surface condition and environmental compatibility |
For customers comparing different silver alloy formulations, Apollo also provides a dedicated Silver Alloy Contact product category.
Request Custom Technical Evaluation
Quality Control & Certifications at Apollo
Solid contact quality cannot be evaluated through visual appearance alone. Material composition, density, hardness, dimensions, and electrical performance must be considered together.
Apollo's quality inspection approach should be based on the contact material, component geometry, and customer's end-product requirements.
Raw Material Verification
Incoming material inspection establishes the composition and traceability of silver and silver alloy materials.
Relevant verification items include:
Silver purity and alloy composition.
Material batch identification.
Raw material certificates.
Powder or material condition, where applicable.
RoHS-related material declarations where required.
For AgNi10 and AgSnO₂ contacts, the alloying component and oxide content must be controlled according to the approved material specification.
Dimensional and Metallographic Inspection
Contact dimensions influence mounting compatibility, contact pressure, and electrical interface geometry.
Recommended inspection equipment and methods include:
Optical image measuring systems for diameter, thickness, and profile.
CMM measurement for suitable component geometries.
Hardness testing for material condition.
Metallographic examination for internal structure and porosity.
Density measurement for powder-metallurgy contact materials.
Surface inspection for cracks, inclusions, and forming defects.
Electrical Performance Testing
Electrical performance should be validated using a defined test setup rather than relying on material conductivity values alone.
Recommended tests include:
| Test item | Inspection purpose |
| Electrical conductivity | Verify material conductivity against its grade |
| Contact resistance | Evaluate electrical resistance at the specified interface |
| Hardness testing | Verify mechanical condition and consistency |
| Density testing | Assess powder metallurgy material consolidation |
| Metallographic analysis | Examine grain structure and material distribution |
| Switching endurance testing | Evaluate performance under defined operating cycles |
| Arc erosion evaluation | Assess contact material loss under switching loads |
| Dimensional inspection | Verify drawing compliance |
For relay and contactor applications, switching endurance tests should specify voltage, current, AC/DC conditions, load type, switching frequency, contact force, and failure criteria. A cycle count without these conditions is not a meaningful service-life specification.
Quality Management and Production Documentation
Xiamen Apollo Electric Co., Ltd. was established in 1990 and identifies electric silver contacts as its main product category. Its product range includes solid contacts, bimetal contacts, trimetal contacts, and contact assemblies.
For customer projects requiring automotive or industrial quality documentation, the inspection and submission scope can be agreed before mass production.
Relevant documentation may include:
Material certificates.
First Article Inspection Report (FAIR).
Process Flow Diagram.
PFMEA.
Control Plan.
Dimensional Inspection Report.
CPK Process Capability Report, where applicable.
PPAP Level 3 documentation, where required by the customer.
Production Batch Control
To maintain consistency between sample approval and repeat production, critical material and process parameters should be recorded by production lot.
For recurring OEM orders, the control plan should identify:
Approved silver alloy grade.
Material supplier and batch.
Forming or sintering process parameters.
Critical dimensions.
Inspection frequency.
Nonconforming product handling.
Packaging and batch identification.
This information supports quality investigation and production traceability throughout the supply relationship.
Frequently Asked Questions
Q: 1. What is the difference between a solid contact and a bimetal silver contact?
A: A solid contact is manufactured from one material throughout its cross-section, such as pure silver or AgNi10. A bimetal silver contact combines a silver contact layer with a conductive substrate, commonly copper. The selection depends on electrical performance, material cost, and assembly design.
Q: 2. Which material is suitable for high-frequency relay switching?
A: AgNi10 and AgSnO₂ are commonly evaluated for relay applications involving frequent switching. AgNi10 provides a balance of conductivity and mechanical strength, while AgSnO₂ offers resistance to arc erosion and contact welding. Final selection requires validation under actual voltage, current, and load conditions.
Q: 3. How does AgSnO₂ improve solid contact performance?
A: AgSnO₂ contains tin oxide particles distributed within a silver matrix. These particles influence arc behavior and help reduce contact welding under suitable switching conditions. Actual performance depends on oxide distribution, material density, contact geometry, and the electrical characteristics of the switching circuit.
Q: 4. What information is required to manufacture custom solid contacts?
A: Provide a 2D drawing or 3D CAD file, silver alloy grade, contact diameter, thickness, dimensional tolerances, application voltage, current, and switching frequency. Annual demand and inspection requirements are also needed to evaluate material selection, tooling, manufacturing processes, and production cost.
Custom Solid Contact Manufacturing by Xiamen Apollo
Selecting the correct silver contact material is a technical decision involving conductivity, hardness, arc erosion, contact resistance, and switching conditions. Apollo supports custom solid contact development for relay, contactor, circuit breaker, and industrial switching manufacturers.
Submit your 2D drawings (.DWG, PDF), 3D CAD files (.STEP), or material specifications for engineering review.
Please include the following project information:
Required material: Ag9999, AgNi10, AgSnO₂, AgSnO₂In₂O₃, or other specified alloy.
Contact dimensions and dimensional tolerances.
Operating voltage and current.
AC or DC switching conditions.
Switching frequency and expected service life.
Prototype quantity and annual production demand.
Required inspection and quality documentation.
Apollo can assess the proposed material, forming process, tooling requirements, and inspection scope. For complete technical inquiries, a preliminary DFM review and factory-direct quotation can be targeted within 24 hours, subject to drawing complexity and specification completeness.
We're professional solid contact manufacturers and suppliers in China, specialized in providing high quality customized service. We warmly welcome you to buy high-grade solid contact from our factory.
Pure Silver Contact, Copper Electrical Contacts, Solid Copper Contacts
