Pure Iron Shell for DC Relay
Pure Iron Shell for DC Relay

Pure Iron Shell for DC Relay

Pure Iron Shell for DC Relay delivers superior EMI shielding and thermal dissipation for EV/HEV DC relays and contactors. Durable and cost‑efficient, it supports custom designs for diverse new‑energy high‑voltage applications.
Send Inquiry
What is the Pure Iron Shell for DC Relay?

 

Product Profile
 

Pure Iron Shell for DC Relay is a stamped metal shielding cover used in EV high-voltage DC contactors and hybrid-electric vehicle relays. Its primary function is to provide a defined metal enclosure around designated components, with electromagnetic shielding effectiveness depending on material properties, shell geometry, seams, openings, and installation. Custom stamping production can be developed around customer drawings, mounting interfaces, dimensional requirements, and approved samples for OEM programs.

Pure Iron Shell for DC Relay
 
Core Product Advantages of shielding cover for EV DC contactor
 
 

Electromagnetic Shielding

The ultra-pure ferrite structure of DT4C soft magnetic iron routes flux lines away from critical coil assemblies. By confining internal magnetic fields within the enclosure, this customized pure iron shell minimizes cross-talk between adjacently mounted switching components.

 
 

Durability

Fabricated using high-tonnage progressive hydraulic presses, the enclosure exhibits high structural rigidity under intense vibration and thermal stress. The uniform grain boundary distribution reduces strain-hardening cracks during deep drawing, ensuring long-term mechanical strength under dynamic load cycles.

 
 

Thermal Management

With a thermal conductivity rating exceeding 70 W/(m·K), the metal housing functions as an effective heat dissipation pathway for internal coils. Heat generated during continuous coil energization is absorbed and transferred outward, mitigating thermal degradation of the wire insulation.

 
 

Cost-Effectiveness

Precision cold-forming processes optimize strip metal usage, reducing raw material waste to under 5%. Mass manufacturing via multi-station tooling lowers unit processing costs while maintaining structural consistency across volume production runs.

 

Pure Iron Coil for Pure Iron Shell for DC Relay

 

Typical Application Scenarios

 

Application

Function of the Pure Iron Shell Engineering Considerations
Shielding Cover for EV DC Contactor Forms a metal cover around designated contactor components Assembly clearance, shell continuity, magnetic shielding target
Shield Cover for New Energy HVDC Provides a shielding enclosure within a high‑voltage DC assembly Field environment, openings, grounding strategy, insulation spacing
Shield Cap for HEV DC Relay Covers designated internal regions of a hybrid‑vehicle relay Package dimensions, mounting interfaces, vibration exposure
Shielding Cover for New Energy High‑Voltage DC Contactor Supports the enclosure design of a high‑voltage DC switching device Material condition, corrosion protection, dimensional repeatability

 

Pure Iron Shell for DC Relay Applications

 

Frequently Asked Questions about Shield cover for new energy HVDC
 

How does vacuum annealing affect the magnetic properties of a Shield Cap for HEV DC Relay?

+

-

Vacuum annealing at 850℃–880℃ removes residual mechanical stress induced during deep drawing. This heat treatment enlarges crystal grains, reduces coercivity, and maximizes magnetic permeability to prevent residual magnetism from causing delayed contact release.

How do you prevent sidewall wrinkling and cracking during deep drawing of pure iron?

+

-

Stamping lines utilize multi-pass progressive dies with precise draw-ring pressure control and specialized high-viscosity synthetic lubricants. Material selection requires strict cold-rolled DT4C strip stock with consistent elongation rates δ5 ≥ 30% to handle severe plastic deformation.

Can custom mounting flanges or terminal cutouts be integrated directly into the stamping process?

+

-

Yes. Custom pierces, side notches, and mounting flanges are stamped directly within the progressive die sequence. This approach eliminates secondary CNC machining operations, ensuring part-to-part consistency and lower unit production costs for complex geometry housings.

What is the typical production lead time for customized pure iron DC relay shells?

+

-

Tooling design, fabrication, and initial sample submission take 10 to 15 working days. Once sample inspection and testing are approved, full-scale mass production orders are typically processed and shipped within 10 to 15 working days.

Processing And Customization Flow for Pure Iron Shell for DC Relay

 

Directly source your customized Pure Iron Shell for DC Relay from our IATF 16949-certified facility to lock in factory-direct pricing and precision engineering support for your high-voltage switching applications.

Mr. Terry from Xiamen Apollo

Hot Tags: DC Contactor Shielding Cover, Pure Iron Stamping Parts, EV Contactor Metal Shell, HVDC Contactor Shield, Custom Pure Iron Shell, Relay Shielding Cover Manufacturer, Pure Iron Shell Wholesale, OEM Iron Stamping Factory, New Energy DC Contactor Parts, Relay Terminal Armature, Relay Yoke, Electrician Pure Iron Armature For Relay, Relay Armature Soft Magnetic Iron, Relay Yoke Pure Iron Plate, HVDC Relay Skeleton Pure Iron