Bimetal Contacts Ag/Cu
Bimetal Contacts Ag/Cu

Bimetal Contacts Ag/Cu

Bimetal Contacts Ag/Cu are rivet‑type composite contacts with a silver‑alloy layer bonded to a copper substrate. Suitable for moving or stationary contacts of relays and switches. It delivers low contact resistance and arc resistance and supports a φ1‑20 mm dimension range. Factory‑made, samples available for verification before mass‑production.
Send Inquiry

What are Bimetal Contacts Ag/Cu?

 

Bimetal Contacts AgCu

 

 

 

 

Bimetal Contacts Ag/Cu use a composite cladding process that bonds a silver alloy working layer to a copper substrate. The copper base delivers high electrical conductivity and good mechanical ductility. The silver alloy surface withstands arc erosion and contact impact during switching. This bimetal structure cuts silver raw material consumption while keeping required electrical contact performance. All parts are manufactured in‑house at the Xiamen Apollo factory, available for custom dimensions and material configuration.

 

 

Technical Features of Bimetallic Silver Contacts

 

Contact resistance

≤100 μΩ under 10 A test conditions. Stable resistance value reduces heat generation during long‑term cyclic switching.

01

Arc erosion resistance

Silver alloy surface withstands arc impact generated by make‑and‑break operations, suppressing Bimetal Silver Contacts welding and material transfer.

02

Substrate mechanical performance

Copper base of the Bimetal Silver Electrical Contacts for Switches supports staking, riveting, and cold heading assembly. Copper substrate conductivity ≥97 % IACS.

03

Dimensional tolerance

Standard tolerance range ±0.01 mm‑±0.05 mm, dimension inspection implemented for every production batch of Silver Bimetal Contact Rivets.

04

Bimetallic Contact Rivet

 

 

 

 

 

 

 

 

 

 

Technical Specification Table of Bimetal Rivet For Relays

 

Item Specification
Available Diameter φ1 mm‑φ20 mm
Contact Resistance ≤100 μΩ @10 A
Typical mechanical life Over 100 000 cycles under 16 A /250 V AC working condition
Assembly method Riveting, staking

 

Bimetal Contacts AgCu Normal Dimension

 

Manufacturing Advantages and Production Capabilities of Precision Electrical Contacts

Cladding Process Capabilities

 

Electrical Relay Silver AgSnO2/Cu Bimetal Rivets adopt cold‑press and hot‑bonding processes to form metallurgical bonding between the silver layer and the copper substrate. Bonding temperature and pressure are set and monitored in each production run. Bond strength is verified to satisfy drawing‑specified requirements.

Precision Machining Capabilities

 

High‑precision stamping equipment and forming dies support multiple shape variants for Electrical Silver Bimetal Contact Rivet. Dies are fabricated from imported alloy steel. Tooling material delivers stable dimension output and long service life in mass‑production cycles.

Quality Inspection Capabilities

 

In‑house lab carries out bond strength tests, electrical resistivity measurement, and microstructure analysis for Bimetal Silver Electrical Contacts for Switches. Each test item follows defined inspection procedures to validate part performance before shipment.

Bimetal Contacts Ag/Cu Production and Testing Equipments

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Frequently Asked Questions about Composite Contacts

What is the typical current rating of Bimetal Silver Alloy Electrical Contacts?

The current capacity depends on the contact material, size, and application structure. Standard products are commonly used in applications ranging from low-current signal switching to medium and high-current loads such as 5A–40A electrical systems.

What is the difference between AgSnO₂ and AgNi Silver Bimetal Contact Rivets?

AgSnO₂ contacts offer stronger arc erosion resistance and better anti-welding performance, making them suitable for higher electrical loads.

AgNi contacts provide higher hardness and better mechanical wear resistance, making them ideal for frequent switching applications.

Can free Bimetal Silver Electrical Contacts for Switches samples be provided?

Yes. After drawing confirmation and mold evaluation, sample pieces can be provided for testing and verification before mass production.

Drawings of Bimetal Contacts Ag/Cu are Welcomed

 

 

 

contact us

 

For detailed technical specifications and drawings of Bimetal Contacts Ag/Cu, or to request sample testing, please contact our technical engineers for a professional response.

 

Mr. Terry from Xiamen Apollo

Hot Tags: Bimetal Contacts Ag/Cu, Silver‑Copper Bimetallic Rivet, Electrical Contact Rivet, Relay Bimetal Contact, Switch Contact Component, Ag Cu Composite Contact, Low‑Resistance Bimetal Contact, Custom Electrical Contacts, Contact Rivet For Household Appliance, OEM Bimetal Contact Parts, Silver Coated Electrical Contacts, Moving Contact For New Energy Relay, Spring Loaded Electrical Contact, Bimetal Electrical Silver Contact Point, Bimetal Silver Contacts, Stationary Electrical Contacts