1. Reasons for the large drop in relay core
There may be many reasons for the large drop in Relay Coil Core, the common ones include:
1. The Relay Iron Core material of the relay is not suitable, resulting in a mismatch between the thermal expansion coefficient of the material itself and the thermal expansion coefficient of the electromagnetic coil.
2. The DT4C Iron Core design of the relay is unreasonable, resulting in large thermal expansion or vibration during operation, which makes the core loose.
3. There is oil or oxide on the surface of the relay core, resulting in poor heat conduction between the core and the coil, causing the core to overheat.
2. How to deal with large drops of relay core
For the above reasons, we can take the following measures to deal with the problem of a large drop in the Electrician Pure Iron Core:
1. Replace the appropriate core material to ensure that its thermal expansion coefficient matches the electromagnetic coil.
2. Design a reasonable core structure, considering the thermal expansion and vibration during operation, to avoid a loose core.
3. Regularly clean and maintain the core surface of the relay to keep it clean and avoid the accumulation of oil and oxide.
4. Use high-quality relay products to ensure that the quality and processing technology of its core meet the standard requirements.
