Products introduction
Among the Custom CNC Aluminum Parts common processes for manufacturing metal prototypes are CNC machining, casting, sheet metal forming, and 3D printing. The commonly used materials are aluminum and steel, with aluminum being the most widely used. The main reasons are as follows.
Excellent Machinability
Aluminum for CNC Aluminum Parts has excellent machinability. The calculation method is the current material processing rate divided by the finished material processing rate. For example, the finished product is usually made of carbon steel. When comparing aluminum alloy with 1212 steel, the cutting speed of aluminum is 3.6 times that of steel. Therefore, the processing time is faster. Although the durability is a little worse, it is sufficient for prototyping.
In addition, various processes of CNC Machined Aluminum Parts can be used to process aluminum alloys, such as CNC turning, CNC milling, grinding, polishing, honing, drilling and tapping, electrical discharge machining (EDM), electrolytic machining, grooving, etc.
Outstanding Performance
Precision and Surface Quality
CNC-machined Aluminum Machined Parts can achieve the best surface finish while precisely controlling tolerances. If polished, a mirror-like surface can be obtained. The maximum tolerance achievable by aluminum processing is IT8-7, and the surface finish is RA 1.25 µm.
Corrosion Resistance
Aluminum has the unique advantage of corrosion resistance. Resistance can form a thin oxide layer on the surface of aluminum, which is only 1 mm thick. Its function is to protect the metal from external harmful substances. Therefore, no additional paint or coating is required on the Aluminum Turned Parts, and rust can be prevented.
Strong Strength-to-Weight Ratio
Aluminum alloy for CNC Milling Aluminum Parts is three times lighter than steel and very light. At the same time, some aluminum alloys have good strength after improvement.
Non-Magnetic Alloy
Aluminum for CNC Aluminum Parts does not react with magnets and can be used to make components that need to resist magnetic fields. Moreover, compared with other similar alloys, aluminum alloys are cheaper.
High Electrical Conductivity
Copper is usually used in electrical components and wiring because of its good electrical conductivity. However, it is soft, expensive, and has poor corrosion resistance. Although the electrical conductivity of aluminum is slightly worse than that of copper, it is also a very good conductive material and can overcome some shortcomings of copper. Therefore, aluminum processing can be used for electrical prototypes, especially when manufacturing complex electrodes CNC Machined Aluminum Parts.
Easy to Recycle
Nowadays, environmental protection is also an element that must be considered in industrial production. Although many materials can be recycled and reused, the corresponding costs are relatively high. Aluminum alloy for Aluminum Machined Parts can be reused only by re-smelting, and the cost is relatively low.
our Products
Our product, CNC Aluminum Parts, is made using these great features of aluminum alloy and advanced CNC machining technology. We use the best CNC machines and careful machining methods to make sure every part is very precise, smooth, and reliable. No matter if you need parts for airplanes, cars, medical devices, electrical equipment, or anything else that needs high-quality metal parts, our CNC Parts can meet your needs and give you a good solution.
We know that customers want high-quality and high-performance products. So, we always try to give the best. Our parts are very precise, smooth, and strong. They are also good for the environment. Choose our Custom CNC Aluminum Parts, and you are choosing quality and reliability. We hope to work with you and help our parts be used in more and more areas. Together, we can make things better and more sustainable.
contact us
