What are the reasons for affecting the contact resistance

Jan 20, 2025 Leave a message

1. Contact material (including surface coating material)


To prevent electrical contact cold welding, it is necessary to use a contact material with higher hardness, such as rhodium/gold-cobalt alloy. However, to obtain low contact resistance and improve contact performance, the hardness of the material should not be too high. Therefore, we should choose according to our actual needs.


The chemical stability of the material is better, the anti-pollution, anti-corrosion, and anti-oxidation ability is strong, the electrical conductivity of the material is better, and the resistivity is low enough to meet the requirements of small and stable Electrical Silver Solid Contact resistance.

 

Good Quality Material for Electric Contact

 

 

 

 

2. Contact pressure


The greater the Electrical Copper Rivet pressure, the larger the contact area and the smaller the contact resistance. However, when the contact pressure increases to a certain value, the reduction of the contact resistance is not obvious but will increase the mechanical wear and electrical wear of the contact. Therefore, the Solid Contact for Switch Part pressure should be controlled within an appropriate range.

 

electrical contacts

 

 

 

 

3. Contact shape and contact form


The Special Size Silver Contact form is closely related to the contact shape, and the contact resistance is large when the point contacts. The contact resistance should be smaller when the line contacts; The contact resistance is smaller when the surface is in contact. In the medium and small power relay, line and surface contact are used to improve the ability of anti-welding and anti-corrosion. Bridge contact forms and bifurcated double contact forms are often used in small relays to adapt to frequent action and improve contact reliability. In addition, although the contact resistance of the large size of the Boat Head Silver Contact can be reduced, the size is too large to waste material and increase the volume and weight and will increase the rebound and rebound time, increase the contact wear, but also reduce the ability to resist vibration and impact.

 

Drawings of Electrical Silver Contacts are Welcomed

 

 

4. Surface brightness


The higher the finish of the Bimetal Contact Rivet surface processing, the more actual contact points, it is not easy to adhere to dust, adsorption of harmful gases and moisture, and enhance the ability to resist corrosion, while reducing the contact resistance. Generally, it is 6-8. If it is too high, it is necessary to polish and grind, and the existence of polishing paste will increase the chance of organic pollution, which is extremely unfavorable. Too high a finish will also increase the chance of cold welding.

 

Un-qualified Electrical Silver Contacts

 

 

 

 

5. Contact contamination


Contaminants include dust, moisture, fibers, liquid organic gases, etc., from the surrounding environment and the processing process and the structural materials (such as insulation materials) of the relay itself. Pollution is an important factor affecting the contact resistance, will produce larger film resistance and chemical corrosion, increase the contact resistance, and reduce the life. Therefore, clean production and ultra-clean production are required to reduce pollution. The use of full sealing technology or Sliding Electrical Contact system, electromagnetic system separate sealing technology is one of the anti-pollution measures.

 

6. Contact temperature


The increase in the surface temperature of the Electric Contact (including the increase in the ambient temperature and the temperature of the contact itself) will make its surface condition and contact area change. In the case of constant contact pressure, the temperature will increase the resistance, so the contact resistance increases, and when the temperature rises to a certain extent, the contact will soften, the contact area will increase, and the contact resistance will decrease. In addition, the temperature increase will aggravate the metal oxidation and chemical corrosion of the Switch Silver Contact, which is not conducive to the stability and reliability of the work. The measures to improve the heat dissipation conditions are: filling high-pressure gas or blackening the shell

 

contact us

 

Terry from Xiamen Apollo